OM SYSTEM OM-1 Mark II - ISO-A Upper;Default)

Setting the range of ISO sensitivity values
selected in [Auto] mode (KISO-A Upper/
Default / bISO-A Upper/Default)
P A S M B n
Choose the range of ISO sensitivity values selected by the camera when [Auto] is selected for [KISO]
or [nISO].
Menu
MENU U a U 3. ISO/Noise Reduction U KISO-A Upper/Default
MENU U n U 3. ISO/Noise Reduction U bISO-A Upper/Default
Upper Limit
Choose the maximum sensitivity selected automatically by the camera.
Set the value using FG or the front/rear dials.
Default
Choose the default sensitivity.
Set the value using FG or the front/rear dials.
Switch between [Upper Limit] and [Default] using HI.
The upper limit and the default settings differ between [KISO] and [nISO]. If the optimal
exposure cannot be achieved under the aperture and shutter speed conditions, a lower sensitivity is
applied.
169
Setting the range of ISO sensitivity values
selected in [Auto] mode (KISO-A Upper/
Default / bISO-A Upper/Default)
C