About [RAW]
When [RAW] is selected, the raw images, to which shooting settings such as exposure compensation
and white balance have not been applied, can be recorded.
Visit our website for information on HDMI devices compatible with [RAW].
When [RAW] is selected, “HDMI” will appear on the camera monitor while outputting signals to an
HDMI device.
The recording format of images output from the camera when [RAW] is selected varies depending
on the HDMI device. Visit our website for details.
When [RAW] is selected and a compatible HDMI device is connected, [nPicture Mode] will be set
to [a2 OM-Log400].
The following limitations apply when [RAW] is selected.
[nX]: Only [C4K] and [4K] can be selected. Slow- or fast-motion movies are not available.
[nImage Stabilizer]: Only [M-IS Off] and [M-IS2] can be selected.
[Digital Tele-converter] will be set to [Off].
[nAF Mode] when using a Four Thirds system lens: Only [MF] and [PreMF] can be selected.
286
HDMI Output (nHDMI Output)
C
C
C
-
-
-
-
To Next Page
Loading...
