OM SYSTEM OM-1 Mark II - Time Codes (Time Code Settings)

Time Codes (Time Code Settings)
P A S M B n
Adjust time code settings. Time codes are used to synchronize picture and sound during editing and
the like. Choose from the following options.
Menu
MENU U n U 5. Sound Recording/Connection U Time Code Settings
Time Code
Mode
Choose a time code recording option. Use time codes where precise timing is
required.
[Drop Frame]: Drop-frame time codes. The time code is adjusted to compensate for
deviations from the recording time.
[Non-DF]: Non-drop-frame time codes. The time code is not adjusted to
compensate for deviations from the recording time.
Count Up
Choose how the time count is incremented.
[Rec Run]: The count is incremented only during recording.
[Free Run]: The count is incremented continuously, including when recording is not
in progress or the camera is off.
Starting
Time
Set a starting time for the time code.
[Reset]: Reset the time code to 00:00:00
[Manual Input]: Enter the time code manually.
[Current Time]: Set the time code to the current time, frame 00.
When setting [Starting Time] to [Current Time], be sure that the camera shows the correct time.
g“Setting the Camera Clock (m Settings)” (P.416)
Time codes are not recorded on high-speed movies (P.214).
284
Time Codes (Time Code Settings)
C
C