OM SYSTEM OM-1 Mark II - Configuring Art Filter Bracketing; Shooting

Select an art filter that you want to apply, and put a check (P)
next to it.
Select an option using FG and press the OK button to
put a check (P) next to it.
To remove the check, press the OK button again.
ART BKT Setting
MENU OK
Pop Art
2
Soft Focus
Pale&Light Color
1
Pale&Light Color
2
Light Tone
Grainy Film
1
Pop Art
1
Configuring art filter bracketing
Select [ART BKT Setting] on the ART BKT setting screen and press the OK button.
ART BKT
Setting
Select the art filters that you want to apply. Picture modes such as [Vivid],
[Natural] and [Muted] can also be selected.
When there are a large number of art filters to be applied, it may take a long time to record
the pictures after shooting.
This setting cannot be combined with bracketing functions other than AE bracketing (P.271)
and flash bracketing (P.274).
Shooting
Press the MENU button to close the ART BKT setting screen and return to shooting screen.
The camera takes one picture when the shutter button is pressed all the way down and
automatically creates multiple copies, each with a different art filter applied.
277
Recording copies of one picture with different
art filters applied (ART BKT)
1.
2.
C
C
1.
2.