OM SYSTEM OM-1 Mark II - Monitor Brightness and Hue (Monitor Adjust)

Monitor Brightness and Hue (Monitor Adjust)
P A S M B n
Adjust monitor color temperature and brightness. This option applies in both still photography and
movie modes.
Menu
MENU U e U 3. Monitor/Sound/Connection U Monitor Adjust
o (Color
temperature)
Adjust color temperature.
Use the front dial or HI to adjust the “amber–blue” axis. Moving the pointer
(0) closer to A adds a red cast and moving it closer to B adds a blue cast.
Use the rear dial or FG to adjust the “green–magenta” axis. Moving the
pointer (0) closer to G adds a green cast and moving it closer to M adds a
magenta cast.
p (Brightness)
Adjust brightness. Select an option using FG.
[-7] – [±0] – [+7]
Press the INFO button to switch between color temperature and brightness and set each item.
You can reset the setting by pressing and holding the OK button.
In B mode, the monitor uses the brightness selected in [Bulb/Time Monitor]. g“Configuring
BULB/TIME/COMP Settings (BULB/TIME/COMP Settings)” (P.269)
400
Monitor Brightness and Hue (Monitor Adjust)