OM SYSTEM OM-1 Mark II - Assigning Roles to the Front and Rear Dials; Dial Function)

Assigning Roles to the Front and Rear Dials
(KDial Function / nDial Function)
P A S M B n
Choose the roles performed by the front and rear dials.
Menu
MENU U C U 1. Operations U Dial Settings U KDial Function
MENU U C U 1. Operations U Dial Settings U nDial Function
Highlight an option and press the OK button.
Choose a dial using the HI buttons and use the FG buttons to choose a role.
Press the INFO button to move between lever positions.
Press the OK button when settings are complete.
When [KFn Lever Function] / [nFn Lever Function] is set to a setting other than [mode1], the
functions assigned to lever 1 is enabled even if the lever is in position 2.
The functions that can be assigned in [KDial Function] are listed below.
Role Function
Shooting mode
P A S M B
Program Shift (Ps) Configure program shift (P.60).
P
— — — —
Shutter Speed (Shutter) Choose the shutter speed. — —
P P P
1
Aperture Value (FNo.) Adjust aperture. —
P
—
P P
Exposure Comp. (F)
Adjust exposure compensation.
P P P P P
Flash Exposure Comp.
(7)
Adjust flash exposure compensation.
P P P P P
347
Assigning Roles to the Front and Rear Dials
(KDial Function / nDial Function)
1.
C