OM SYSTEM OM-1 Mark II - Setting with Super Control Panel;Lv Super Control Panel

Press the OK button.
If you press the button during live view, the LV super control
panel will be displayed in the monitor.
The last setting used will be highlighted.
4567 1:42:22
S-IS Auto
±
0.3
Shooting Mode
0.0
5.6250P
Small
S-AF
4 : 3
1/
Auto
ISO
60p L
-
8
Off
3
0
+
-
200
WB Auto
0
L F L F
1
Cursor
1
Highlight an item using FGHI.
The selected setting will be highlighted.
The name of the selected function appears.
You can also highlight items by tapping them in the display.
1023 1:02:03
±
F
S-IS Auto
±
0.3
Subject Detection
0.0
5.6250P
Small
S-AF
4 : 3
1/
Auto
ISO
60p L
-
8
Off
3
0
+
-
200
WB Auto
0
L F L F
Rotate the front/rear dial to change the highlighted setting.
Setting with Super Control Panel/LV Super
Control Panel
This section explains how to operate super control panel/LV super control panel using [Subject
Detection] as an example.
Press the shutter button halfway to save the current setting and exit to the shooting display.
In this manual, the procedure for changing a setting using a direct button is shown as follows.
Super control panel
OK U Subject Detection
91
Setting with Super Control Panel/LV Super
Control Panel
1.
2.
3.