OM SYSTEM OM-1 Mark II - Metering the Focus Target; Spot Metering)

Metering the Focus Target (YSpot
Metering)
P A S M B n
Choose whether the camera meters the current AF target when [C] is selected for [Metering].
Settings can be adjusted separately for spot, spot highlight, and spot shadow metering.
Menu
MENU U a U 5. Metering U YSpot Metering
Select a metering method with which you want the camera to meter the current AF target, and
put a check (P) next to it.
Select an option using FG and press the OK button to put a check (P) next to it. To
remove the check, press the OK button again.
Spot
Applied when [Metering] is [C] (spot metering).
Spot Hilight
Applied when [Metering] is [CHi] (spot highlight metering).
Spot Shadow
Applied when [Metering] is [CSh] (spot shadow metering).
The selected option takes effect when XSingle or oSmall is selected as the AF target mode
(P.106).
The camera zooms in on the selected AF target during focus zoom (P.111).
Not applied when a setting other than [Off] is selected for [Subject Detection].
Not applied when [C-AF+TR] or [C-AF+TRJ] is selected for AF Mode.
165
Metering the Focus Target (YSpot Metering)
1.
C
C
C
C