Press the button of the function you want to use.
Press the AFT button.
A selection menu appears.
S-AF C-AF
J
C-AF+TR Pre
J R
AF
Single AF
ESP
Hi Sh
1
Selection menu
1
Rotate the front/rear dial so select a setting.
Setting with Direct Buttons
This section explains how to operate when a selection menu is displayed, using [AF Mode] as an
example.
Setting values can also be selected by tapping the screen.
You can also use the FGHI buttons.
If setting values appear at the top and bottom of the display when you press the button in
Step 1, use the following buttons.
FG: Selects items displayed at the top.
HI: Selects items displayed at the bottom.
In this example, rotate the rear dial to set [AF Mode].
Press the shutter button halfway to save the current setting and exit to the shooting display.
You can also return to the shooting display by pressing the button you pressed in Step 1.
With some functions, further detailed settings are available after selecting the setting in Step 2. For
information on how to operate, see the explanation of each function.
87
Setting with Direct Buttons
1.
2.
To Next Page
Loading...
