OM SYSTEM OM-1 Mark II - Long Exposure Noise Reduction Options (Noise Reduction)

Long Exposure Noise Reduction Options
(Noise Reduction)
P A S M B n
Choose whether to process photos taken at slow shutter speeds to reduce image artifacts (“noise”). At
slow shutter speeds, noise is caused by the heat generated from the camera itself. After each photo is
taken, the camera captures a second image for noise reduction, causing a delay equal to the selected
shutter speed before the next photo can be taken.
Menu
MENU U a U 3. ISO/Noise Reduction U Noise Reduction
Off Noise reduction not performed.
On Noise reduction is performed at all shutter speeds.
Auto
Noise reduction is performed automatically when the camera’s internal temperature is
elevated.
During noise reduction, the camera displays the time remaining until the process is complete.
During sequential shooting, [Off] is selected automatically and noise reduction is not performed.
Noise reduction may not produce the desired effects depending on the subject and shooting
conditions.
To use this function in silent mode, it is required that you configure the [Silent I Settings] setting
(P.198).
174
Long Exposure Noise Reduction Options (Noise
Reduction)
C
C
C
B