OM SYSTEM OM-1 Mark II User Manual

Sleep Mode
If no controls are used for a set period, the camera will automatically enter suspend operation to
reduce the drain on the batteries. This is referred to as “sleep mode”.
When the camera enters sleep mode, the monitor will turn off and operation will be suspended.
Pressing the shutter or q button reactivates the camera.
If no operations are performed for a set period after the camera enters sleep mode, the camera will
turn off automatically. The camera can be reactivated by turning it on again.
The camera may require additional time to recover from sleep mode when [On] (enabled) is
selected for [QSettings] > [Power-off Standby].g“Wireless Settings for When the Camera Is
Off (Power-off Standby)” (P.429)
The delay before the camera goes to sleep or turns off automatically can be selected in the menu.
g“Setting Sleep (Power Saving) Options (Sleep)” (P.411), “Setting Auto Power Off Options (Auto
Power Off)” (P.412)
40
Turning the camera on
C
B

OM SYSTEM OM-1 Mark II Specifications

General

Camera Type	Mirrorless
Sensor Resolution	20.4MP
Image Processor	TruePic X
Connectivity	Wi-Fi, Bluetooth, USB-C, HDMI
Body Construction	Magnesium Alloy
Dimensions	134.8 x 91.6 x 72.7 mm
Sensor Size	Four Thirds
ISO Range	ISO 200-102400 (expandable to ISO 80-102400)
Image Stabilization	5-axis in-body
Autofocus System	1053-Point Hybrid Autofocus
Viewfinder Type	Electronic (EVF)
Viewfinder Resolution	5.76 million dots
Viewfinder Magnification	1.65x (35mm equivalent)
Rear Screen	3.0" vari-angle touchscreen
Rear Screen Resolution	1.62 million dots
Video Recording	4K UHD at 60p/50p/30p/25p/24p
Video Format	MOV
Audio Recording	Stereo, external mic input
Storage Media	Dual SD Card Slots (UHS-II)
Battery	BLX-1 Lithium-Ion Battery
Weight	599 g (with battery and memory card)
Battery Life	Approx. 520 shots (CIPA standard)
Shutter Speed	1/8000 to 60 sec
Weather Sealing	Yes (IP53 rated)