OM SYSTEM OM-1 Mark II - Attaching and Removing Lenses; Attaching a Lens to the Camera

Confirm that the ON/OFF lever is in the OFF position.
Remove the rear cap of the
lens and the body cap of the
camera.
1
2
1
2
Align the lens attachment mark (red) on the camera with the
alignment mark (red) on the lens, then insert the lens into the
camera’s body.
1
Lens attachment mark
1
Rotate the lens clockwise until you hear it click.
Do not press the lens release button.
Do not touch internal portions of the camera.
C
C
Attaching and removing lenses
Attaching a lens to the camera
See “Interchangeable lenses” (P.474) for information on compatible lenses.
36
Attaching and removing lenses
1.
2.
3.
4.