OM SYSTEM OM-1 Mark II - Choosing a Display

Select an indicator you wish to display when the INFO button
is pressed, and put a check (P) next to it.
Select an option using FG and press the OK button to
put a check (P) next to it.
To remove the check, press the OK button again.
n
Info Settings
MENU OK
Information 1
Information 2
Image Only
nInfo Settings setting screen
Configuring nInfo Settings
Image Only No information will be displayed.
Information 1
Select an option using FG and press the OK button to put a check (P)
next to it.
To remove the check, press the OK button again.
To set the details of an item to be displayed, press I. The following items
can be set.
[X] / [Level Gauge] / [All Battery Information] / [Image Stabilizer] /
[Picture Mode] / [WB] / [AF Mode] / [Subject Detection] / [Sound
Recording Level Meter] / [Headphone Volume] / [Time Code] / [Silent
7Operation] / [Grid]
Information
2
The set that is currently in use cannot be disabled, but the items to be displayed can be
configured.
Choosing a Display
Press the INFO button during shooting to cycle through the selected displays. g“Switching the
information display” (P.49)
372
Shooting Indicators (KInfo Settings / nInfo
Settings)
1.
B