OM SYSTEM OM-1 Mark II - Setting the Card to Record to ( K Card Slot Settings; N Card Slot Settings); Configuring; Card Slot Settings]

Setting the card to record to (KCard Slot
Settings / nCard Slot Settings)
P A S M B n
When there are cards in both slots 1 and 2, you can select which card to record still images and movies
to.
Super control panel
OK U KSave Settings
Menu
MENU U e U 1. Card/Folder/File U KCard Slot Settings
MENU U e U 1. Card/Folder/File U nCard Slot Settings
Configuring [KCard Slot Settings]
KSave
Settings
Choose the recording method for still images (P.389).
[Standard] / [Auto Switch] / [Dual Independent 5] / [Dual Independent 6] /
[Dual Same 5] / [Dual Same 6]
KSave
Slot
Choose the card used to record photographs. This option takes effect when
[Standard] or [Auto Switch] is selected for [KSave Settings].
[Slot 1]: Photographs are recorded on the card in slot 1.
[Slot 2]: Photographs are recorded on the card in slot 2.
qSlot
Choose the card used for still image playback when [KSave Settings] is set to
[Dual Independent 5], [Dual Independent 6], [Dual Same 5], or [Dual Same
6].
[Slot 1]: Photographs on the card in slot 1 are played back.
[Slot 2]: Photographs on the card in slot 2 are played back.
You can also choose a card for playback using the q button. Hold the q button and rotate the
front or rear dial to switch cards while playback is in progress. This does not change the option
selected for [qSlot].
388
Setting the card to record to (KCard Slot
Settings / nCard Slot Settings)
B