OM SYSTEM OM-1 Mark II - Viewfinder Brightness and Hue (EVF Adjust)

Viewfinder Brightness and Hue (EVF Adjust)
P A S M B n
Adjust viewfinder brightness and hue. The display switches to the viewfinder while these settings are
being adjusted.
Menu
MENU U e U 3. Monitor/Sound/Connection U EVF Adjust
o (Color
temperature)
Adjust color temperature.
Use the front dial or HI to adjust the “amber–blue” axis. Moving the pointer
(0) closer to A adds a red cast and moving it closer to B adds a blue cast.
Use the rear dial or FG to adjust the “green–magenta” axis. Moving the
pointer (0) closer to G adds a green cast and moving it closer to M adds a
magenta cast.
p (Brightness)
[EVF Auto Luminance Off] / [EVF Auto Luminance On]: Viewfinder
brightness and indicator contrast adapt automatically to ambient lighting
conditions. Change the setting using HI.
[p]: Adjust brightness. Select an option using FG.
[-7] – [±0] – [+7]
Brightness cannot be changed when [EVF Auto Luminance On] is selected.
Press the INFO button to switch between color temperature and brightness and set each item.
You can reset the setting by pressing and holding the OK button.
401
Viewfinder Brightness and Hue (EVF Adjust)
C