OM SYSTEM OM-1 Mark II - Changing the Functions of the Multi Selector (Multi Selector Settings)

Changing the Functions of the Multi Selector
(Multi Selector Settings)
P A S M B n
Choose the direction in which the dials are rotated to set exposure.
Menu
MENU U C U 1. Operations U Multi Selector Settings
UCenter
Button
Choose the operation performed by pressing the multi selector. The multi selector
can then function as a button.
[Off]: No function is assigned. Pressing the multi selector has no effect.
[Y]: Press the multi selector to adjust settings for AF target selection or AF
target mode. The arrow pad or front and rear dials can be used according to the
setting selected for [YSelect Screen Settings] (P.140).
[YHP]: The multi selector performs the function selected for [KButton
Function] > [YHome] (P.138).
This option applies in still photography modes only.
TDirection
Key
Choose the operation performed by tilting the multi selector. The multi selector
is normally used to position the AF target, but this function can be disabled to
prevent unintended operation.
[Off]: No function is assigned.
[Y]: The multi selector can be used to position the AF-target.
351
Changing the Functions of the Multi Selector
(Multi Selector Settings)
C