OM SYSTEM OM-1 Mark II - Keystone Correction and Perspective Control (Keystone Comp.)

When you select [On], a keystone compensation icon is
displayed and sliders appear on the monitor.
1
10231023
P
1 / 250
P
1 / F 250 5.65.6
1
1
[
1
:
02
:
03
][
1
:
02
:
03
]
FF 60p60p L
-
8L
-
8
L
1
4K
F
100 %
200200
ISO
Auto
ISO
Auto
Keystone correction and perspective control
(Keystone Comp.)
P A S M B n
Keystone distortion due to the influence of lens focal length and proximity to the subject can be
corrected, or enhanced to exaggerate the effects of perspective. Keystone compensation can be
previewed in the monitor during shooting. The corrected image is created from a smaller crop, slightly
increasing the effective zoom ratio.
Menu
MENU U b U 2. Other Shooting Functions U Keystone Comp.
Off Keystone compensation is not applied.
On Keystone compensation is applied.
Frame the shot and adjust keystone compensation while viewing your subject in the display.
Rotate the front dial to make horizontal adjustments and the rear dial to make vertical
adjustments.
Use FGHI to position the crop. The direction in which the crop can be moved is shown
by the J icon.
To cancel changes, press and hold the OK button.
To adjust aperture, shutter speed, and other shooting settings, press the INFO button.
The camera will return to the standard shooting display.
The P icon is displayed while keystone compensation is enabled. The icon is displayed in
green if adjustments have been made to keystone compensation settings.
To return to the keystone compensation display shown in Step 1, press the INFO button
repeatedly.
264
Keystone correction and perspective control
(Keystone Comp.)
1.
2.