OM SYSTEM OM-1 Mark II - Configuring the Sequential Shooting Functions (Sequential Shooting Settings)

Select a sequential shooting mode that you want to have
displayed, and put a check (P) next to it.
Select an option using FG and press the OK button to
put a check (P) next to it.
To remove the check, press the OK button again.
Sequential Shooting Settings
MENU
B
B
SH1
B
SH2
ProCap
ProCapSH1
g
ProCapSH2
OK
20fps
120fps
50fps
10 / 20fps
28 / 120fps
12 / 50fps
10fps
Sequential Shooting Settings
screen
Configuring the sequential shooting functions
(Sequential Shooting Settings)
P A S M B n
You can choose which types of sequential shooting modes are displayed when you press the gYA
button, and the maximum speed/number of frames for each sequential shooting mode.
Menu
MENU U a U 7. Drive Mode U Sequential Shooting Settings
[F] is displayed when [Anti-Shock H] is set to [On] in [Anti-Shock H Settings]
(P.197).
Press I.
Configure options.
Max fps
Set the shooting speed for sequential shooting. The numbers indicate the
approximate maximum speeds.
g/F: 1 – 10 fps
B: 5, 10, 15, 20 fps
B SH1: 60, 100, 120 fps
B SH2: 12.5, 16.7, 25, 50 fps
ProCap: 5, 10, 15, 20 fps
ProCap SH1: 60, 100, 120 fps
ProCap SH2: 12.5, 16.7, 25, 50 fps
193
Configuring the sequential shooting functions
(Sequential Shooting Settings)
1.
B
2.
3.