Choosing a Flash Mode (Flash Mode)
Button
gYA Button UFGl
Super control panel
OK U Flash Mode
Flash Modes
Flash modes that are displayed vary depending on the configuration of [Flash Mode Settings] (P.183).
A
Fill In
Enable the flash.
Shutter speed can be set to values between that selected for [A
Slow Limit] (P.187) and [A X-Sync.] (P.186).
B
Flash Off
Disable the flash.
The flash will not fire even if the unit is on.
ASlow
Slow
Slow shutter speeds are used to capture both the main subject and the
background.
Shutter speed is set according to the exposure value metered by
the camera and is not restricted by the option selected for [A Slow
Limit].
A Manual
Manual
The flash fires at the selected level.
Appears only when the FL-LM3 is attached.
179
Choosing a Flash Mode (Flash Mode)
C
C
C