OM SYSTEM OM-1 Mark II - Digital Zoom ( K Digital Tele-Converter; N Digital Tele-Converter)

When [On] is selected, an icon is displayed and, when live view is
enabled, it is enlarged.
The size of the AF targets (P.106) increases and their number
decreases.
2x2x
1
10231023
P
1 / 250
P
1 / F 250 5.65.6
1
1
[
1
:
02
:
03
][
1
:
02
:
03
]
FF 60p60p L
-
8L
-
8
S
-
AFS
-
AF
33
L
1
4K
F
00
+
-
0.00.0 200200
ISO
Auto
ISO
Auto
100 % 100 %
Digital Zoom (KDigital Tele-converter /
nDigital Tele-converter)
P A S M B n
This option takes a crop at the center of the frame the same dimensions as the size option currently
selected for image quality and zooms it in to fill the display. This allows you to zoom in past the lens’
maximum focal length, making it a good choice when you are unable to switch lenses or find it difficult
to get any closer to your subject.
Menu
MENU U b U 2. Other Shooting Functions U KDigital Tele-converter
MENU U n U 1. Basic Settings/Image Quality U nDigital Tele-converter
Off Pictures are taken without using this function.
On Images are recorded enlarged (Still pictures: 2x, Movies: 1.4x).
JPEG images are recorded at the selected zoom ratio.
In the case of RAW images, a frame shows the zoom crop. A frame showing the zoom crop is
displayed on the image during playback.
In still photography mode, the following cannot be used: multiple exposure, keystone
compensation, and fish-eye correction.
In movie mode, this function cannot be used during high-speed movie recording.
This function cannot be used when outputting HDMI signals in [RAW] (P.285).
You cannot zoom in on the display when [nDigital Tele-converter] is set to [On].
g“Previewing the subject (G)” (P.55), “Zoom frame AF/Zoom AF (Super Spot AF)” (P.111),
“Manual Focus Assist (MF Assist)” (P.144)
259
Digital Zoom (KDigital Tele-converter /
nDigital Tele-converter)
C
C
C
C