OM SYSTEM OM-1 Mark II - Pairing the Camera and Smartphone (Wi-Fi Connection)

Scan the QR code, using
the OI.Share app.
Connection Setup 3/3
MENU
Bluetooth Name xxxxxxxxxxx:
Bluetooth Passkey 000000:
Wi-Fi SSID xxx-x-x-xxxxxxxx:
Wi-Fi Password 0000000000000000:
1
2
3
Bluetooth local name
Bluetooth Passcode
Wi-Fi SSID
Wi-Fi Password
QR code
1
2
3
Pairing the Camera and Smartphone (Wi-Fi
Connection)
Follow the steps below when connecting the devices for the first time.
Adjust pairing settings using OM Image Share, not the settings app that is part of the smartphone
operating system.
Launch the copy of the dedicated OM Image Share app previously installed on your
smartphone.
Tap the J icon displayed on the shooting standby screen.
You can also perform the following operations.
Super control panel
CA
Menu
MENU U e U 4. Wi-Fi/Bluetooth U Wi-Fi Connection
Select [Device Connection] and press the OK button.
Follow the on-screen guide to adjust Wi-Fi/Bluetooth
®
settings.
The Bluetooth local name and passcode, the Wi-Fi SSID and password, and a QR code are
displayed in the monitor.
Tap the camera icon at the bottom of the OM Image Share display.
An [Easy Setup] tab will be displayed.
426
Pairing the Camera and Smartphone (Wi-Fi
Connection)
1.
2.
B
3.
4.
5.