OM SYSTEM OM-1 Mark II - Functions for Setting the Focusing Position; Matching AF Target Selection to Camera Orientation ( Orientation Linked )

Select a function with which you want to save different settings
for landscape and portrait orientations, and put a check (P)
next to it.
Select an option using FG and press the OK button to
put a check (P) next to it.
To remove the check, press the OK button again.
K
Orientation Linked
Y
MENU OK
AF Target Point
AF Target Mode
KOrientation Linked Y
setting screen
Functions for setting the focusing
position
Matching AF Target Selection to Camera
Orientation (KOrientation Linked Y)
P A S M B n
The camera can be configured to change the AF target position and AF target mode automatically
when it detects that it has been rotated between landscape (wide) or portrait (tall) orientations.
Rotating the camera changes the composition and consequently also the position of the subject in
the frame. The camera can store the AF target mode and AF target position separately according
to camera orientation. When this option is active, [KY Set Home] (P.138) can be used to store
separate home positions for landscape and portrait orientations.
Menu
MENU U AF U 6. AF Target Settings & Operations U KOrientation Linked Y
AF Target
Mode
When you put a check (P) next to this, the camera saves separate
AF target modes (e.g., bAll, oSmall) for landscape and portrait
orientations.
AF Target
Point
When you put a check (P) next to this, the camera saves separate AF
target positions for landscape and portrait orientations.
136
Matching AF Target Selection to Camera
Orientation (KOrientation Linked Y)
1.