Adjusting Wi-Fi Settings (Wi-Fi Connection)
Adjust settings for connection to the network to which the paired computer belongs.
Before the camera can connect to the computer via Wi-Fi, it must be configured for connection to the
network via the Wi-Fi router or access point. Multiple network profiles can be stored on the camera
and recalled as desired. [Wi-Fi Connection] settings can be adjusted via the following methods:
Connect by
WPS
Configure the camera for automatic connection (P.442).
To connect using a WPS router or access point, simply press the device’s WPS
button.
[PBC Method]: Connect using only the router WPS button. The camera connects
automatically when the button is pressed.
[PIN Method]: The camera connects in PIN mode. Enter the camera PIN on the
router to connect.
Connect from
z List
Choose the network from a list (P.447).
The camera will search for available networks; to connect, select a network from
the list and enter the network password.
Connect
manually
Adjust connection settings manually (P.444).
To connect, enter the network name (SSID) and other settings.
WPS connections require a WPS-compatible router or access point.
Connecting via WPS in PIN mode requires that the router itself be connected to an administrator
computer from which the PIN can be entered.
Manual connection requires that you have information on the network to which you are connecting.
The camera can connect via routers or access points of the following types:
Standard: IEEE802.11a/b/g/n/ac
Band: 2.4GHz or 5GHz
Security: WPA2, WPA3
The camera can store settings for up to eight networks. The camera will automatically connect to
networks to which it has previously connected.
Each new connection after the eighth overwrites settings for the connection that has been left
unused for the longest period of time.
Adding a network profile for an access point with the same MAC address as existing profile
overwrites the settings for the existing profile.
For information on using routers or access points, see the documentation provided with the device.
Network profiles are not reset when you select [Initialize All Settings] for [Reset/Initialize
Settings] (P.415). To reset network settings, use [Wi-Fi PC Settings] (P.448)> [Reset Wi-Fi PC
Settings].
441
Adjusting Wi-Fi Settings (Wi-Fi Connection)
-
-
-
To Next Page
Loading...
Need help?
General
