OM SYSTEM OM-1 Mark II - Setting the Exposure Balance for TTL Metering (Balanced Flash Metering)

Setting the exposure balance for TTL metering
(Balanced Flash Metering)
P A S M B n
Set the exposure balance to be used when using an external flash in TTL metering mode.
Menu
MENU U a U 6. Flash U Balanced Flash Metering
Off Gives priority to the subject during metering.
On Gives priority to the balance between the subject and the background during metering.
When selecting [On], it is recommended that you set [KISO] to [Auto].
189
Setting the exposure balance for TTL metering
(Balanced Flash Metering)
B