Cautions
Information about Dust and Water-resistant
Features
This camera has a water-resistant specification of IPX3 (when used in combination with an IPX3 or
higher water-resistant lens supplied by our company).
This camera has a dust resistant specification of IP5X (under our company’s test conditions).
Precautions
Dust and water-resistant capabilities may be lost when the camera is subjected to shock.
Check the following parts for foreign material including dirt, dust or sand: packing parts of the
battery compartment cover, card compartment cover, connector covers, and the parts that come
in contact with them, and the parts that come in contact when attaching the lens and accessories.
Wipe off foreign material with a clean cloth that does not produce textile waste.
To ensure dust and water-resistant capabilities, close the covers firmly and attach the lens before
use.
Do not operate the camera, open/close the covers, or attach/remove the lens when they are wet.
Water-resistant feature is ensured only when compatible lenses/accessories are attached. Check the
compatibility.
For compatible accessories, visit our website.
Maintenance
Wipe off water thoroughly with a dry cloth.
Remove foreign materials such as dirt, dust, or sand thoroughly.
471
Information about Dust and Water-resistant
Features
To Next Page
Loading...
