OM SYSTEM OM-1 Mark II - Letting the Camera Choose Aperture and Shutter Speed (: Program AE)

Rotate the mode dial to P.
Focus and check the display.
Use the front and rear dials to adjust the following settings.
Front dial: Exposure compensation (P.152)
Rear dial: Program shift (P.60)
The shutter speed and aperture chosen by the camera are
displayed.
1
10231023
P
1 / 250
P
1 / F 250 5.65.6
1
1
[
1
:
02
:
03
][
1
:
02
:
03
]
FF 60p60p L
-
8L
-
8
S
-
AFS
-
AF
33
200200
L
1
4K
ISO
Auto
ISO
Auto
F
00
+
-
0.00.0
100 % 100 %
1 2 3
Shooting mode
Shutter speed
Aperture
1
2
3
Letting the camera choose aperture and
shutter speed (P: Program AE)
P A S M B n
The camera chooses the optimal aperture and shutter speed according to subject brightness.
Exposure compensation can also be adjusted using the F button. Press the F button and
then rotate the front or rear dial.
Release the shutter.
You can choose the functions performed by the front and rear dials. g“Assigning Roles to the
Front and Rear Dials (KDial Function / nDial Function)” (P.347)
You can use the Fn lever to reverse the roles of the front and rear dials. The Fn lever can also be
assigned other roles. g“Customizing the Fn Lever (Fn Lever Settings)” (P.352)
58
Letting the camera choose aperture and shutter
speed (P: Program AE)
1.
2.
B
3.
B
B