OM SYSTEM OM-1 Mark II - Displaying the MAC Address; Resetting Wi-Fi Settings for PC Connection (Wi-Fi PC Settings)

The camera will return to the standard shooting display. A
on the screen will turn green.
1
10231023
P
1 / 250
P
1 / F 250 5.65.6
1
1
[
1
:
02
:
03
][
1
:
02
:
03
]
FF 60p60p L
-
8L
-
8
S
-
AFS
-
AF
33
200200
L
1
4K
ISO
Auto
ISO
Auto
F
00
+
-
0.00.0
100 % 100 %
Press the OK button to exit to the shooting display.
Connecting to Previously-Selected Networks
The camera will automatically reconnect to previously-selected networks when you select [PC
Connection] via the J icon. You will not be required to supply a password.
If multiple networks are available, the camera will connect first to the most recently-used
network.
Once the camera has connected, it will display a list of available networks with the current
network shown by a check mark (P).
To connect to a different network, highlight it in the list and press the OK button.
If the camera has been paired with more than one computer on the network, you will be
prompted to choose a computer before the network list is displayed. Highlight the desired
computer using the FG buttons and press the OK button.
Displaying the MAC address / Resetting Wi-Fi
settings for PC connection (Wi-Fi PC Settings)
You can display the camera’s MAC address for Wi-Fi connection and reset the Wi-Fi settings used for
connection to a computer.
Menu
MENU U e U 4. Wi-Fi/Bluetooth U Wi-Fi PC Settings
Wi-Fi MAC Address Display the camera’s MAC address for Wi-Fi connection.
Reset Wi-Fi PC Settings
Delete the information about computers the camera has paired with and
access points the camera has connected to.
448
Adjusting Wi-Fi Settings (Wi-Fi Connection)
5.
B