OM SYSTEM OM-1 Mark II - Viewfinder Info Display Options; Info Settings)

Select an indicator you wish to display when the INFO button
is pressed, and put a check (P) next to it.
Select an option using FG and press the OK button to
put a check (P) next to it.
To remove the check, press the OK button again.
qK
Info Settings
MENU OK
Information 1
Information 2
Information 3
Image Only
qKInfo Settings setting
screen
Viewfinder Info Display Options (qKInfo
Settings)
P A S M B n
Choose the information that can be viewed by pressing the INFO button in the viewfinder display. Just
as you can with the monitor, you can display a histogram or level gauge in the viewfinder by pressing
the INFO button. This item is used to choose the types of display available. This option takes effect
when [qStyle 1] or [qStyle 2] is selected for [EVF Style] (P.368) during still photography. The
option selected for [nInfo Settings] (P.372) takes effect in movie recording mode.
Menu
MENU U C U 4. Information U qKInfo Settings
Image Only No information will be displayed.
Information 1
Select an option using FG and press the OK button to put a check (P)
next to it.
To remove the check, press the OK button again.
To set the details of an item to be displayed, press I. The following items
can be set.
[X]: A histogram superimposed on the display in the viewfinder.
[Highlight&Shadow]: Tints applied to over- and under-exposed areas.
[Level Gauge]: The level gauge.
[All Battery Information]: Information on all batteries.
Information
2
Information
3
374
Viewfinder Info Display Options (qKInfo
Settings)
1.