Press the OK button when the initial setup dialog is displayed
prompting you to choose a language.
Please select your language.
Por favor, selecciona tu idioma.
Veuillez choisir votre langue.
Bitte wählen Sie Ihre Sprache.
OK
OK
OK
OK
OK
OK
Highlight the desired language using the front or rear dial or
the FGHI buttons.
W
OK
EnglishNederlandsČesky
DeutschFrançaisSuomi
Norsk
Italiano
Русский
Português(Pt)
Polski
SvenskaEspañol
Türkçe
Press the OK button when the desired language is highlighted.
W
OK
EnglishNederlandsČesky
DeutschFrançaisSuomi
Norsk
Italiano
Русский
Português(Pt)
Polski
SvenskaEspañol
Türkçe
Initial setup
After turning the camera on for the first time, perform the initial setup by choosing a language and
setting the camera clock.
The file name is also included with the date and time information. Be sure to set the correct date
and time before using the camera. Some functions cannot be used if the date and time have not
been set.
If you press the shutter button before pressing the OK button, the camera will exit to
shooting mode and no language will be selected. You can perform the initial setup by
turning the camera off and then on again to display the initial setup dialog and repeating the
process from Step 1.
The language can be changed at any time from the menu. g “What to Do If You Can’t
Read the Display” (P.43)
41
Initial setup
C
1.
2.
3.
B
To Next Page
Loading...
