Wireless Connection Standby Setting for
When the Camera Is On (Bluetooth)
You can choose whether the camera will be on standby for wireless connection with a smartphone or
optional remote control when the power is on.
Complete the pairing of camera and smartphone or the optional remote control beforehand.
[Bluetooth] cannot be selected unless the pairing has been completed.
Menu
MENU U e U 4. Wi-Fi/Bluetooth U Bluetooth
Off
The camera will not be on standby for wireless connection and wireless signal will not be
emitted even when the power is on.
OnC
When the camera is on, it will emit wireless signal and be on standby for wireless
connection.
You can connect the camera and the smartphone through operation of OM Image Share
and shoot remotely or transfer images.
OnL
When the camera is turned on, it will start transmitting wireless signals, and if the devices
have already been paired (P.457), it will stand by for connection from a remote control.
If the GPS track log is enabled in the dedicated OM Image Share app, location data downloaded
from the app will be added to pictures taken while [OnC] is selected.
428
Wireless Connection Standby Setting for When
the Camera Is On (Bluetooth)
B
B
To Next Page
Loading...
