OM SYSTEM OM-1 Mark II - Configuring High Res Shot

Configure options.
Press FG to select an item and press the OK button to
display the setting menu.
After configuring options, press the OK button to return to
High Res Shot setting screen.
High Res Shot
High Res Shot
MENU OK
MX
H
F+RAW
M
RAW Recording Bit
12bit
Waiting Time 0sec
A
Charge Time 0sec
On
v
Use HI to select [Onv] (tripod) or [Onu] (handheld) and press the OK button.
Off High Res Shot is disabled.
Onv
(Tripod)
Shoot with the camera fixed to a tripod. The RAW picture is recorded in 80M
(10368 × 7776).
Onu
(Handheld)
Shoot with the camera in your hands. The RAW picture is recorded in 50M
(8160 × 6120).
The display returns to the High Res Shot setting screen.
When setting from the button, you can turn this function on and off using the M button.
You can also switch between [Onv] (tripod) and [Onu] (handheld) by rotating the front or rear
dial while pressing the M button.
Configuring High Res Shot
MX
Choose the image quality of High Res Shot shooting (P.211).
MRAW
Recording Bit
Select the bit depth of RAW images created.
[12bit]/[14bit]
A [14bit] image will have richer tones, but the file size will be larger
and the post-processing time will also be longer than that of a [12bit]
image. Choose for pictures that will later be edited on a computer.
Waiting Time
Set how long the camera waits before releasing the shutter after you press
the shutter button fully. Use this to prevent the effect of camera shake
caused by the pressing of the shutter button.
240
Shooting still pictures in a higher resolution
(High Res Shot)
C
2.
3.
B
1.