OM SYSTEM OM-1 Mark II - Combining Pictures (Image Overlay)

Highlight a RAW image to overlay using the FGHI
buttons and press the OK button.
The P icon will appear on the selected image. To remove
the P icon, press the OK button again.
The overlaid image will be displayed if images of the
number specified in Step 3 are selected.
RAW
RAW RAW
RAW
RAW RAW RAW
Image Overlay
MENU OK
1
Adjust the gain for each of the images in the overlay.
Highlight images using the HI buttons and adjust gain
using the FG buttons.
Gain can be adjusted in the range 0.1 – 2.0. Check the results
in the monitor.
MENU OK
1
x1.0 x1.0 x1.0
Image Overlay
Combining Pictures (Image Overlay)
Overlay existing RAW photos and to create a new picture. Up to 3 pictures can be included in the
overlay.
The results can be modified by adjusting brightness (gain) separately for each picture.
The overlay is saved in the format currently selected for image quality. Overlays created with [RAW]
selected for image quality are saved in RAW format and in JPEG format using the image quality
option selected for [X2] (P.211).
Overlays saved in RAW format can in turn be combined with other RAW images to create overlays
containing 4 or more pictures.
Display an image you want to edit and press the OK button.
The playback direct menu will be displayed.
Highlight [Image Overlay] using FG and press the OK button.
Select the number of images to be overlaid and press the OK button.
Press the OK button; a confirmation dialog will be displayed.
Highlight [Yes] and press the OK button.
324
Combining Pictures (Image Overlay)
B
B
1.
2.
3.
4.
5.
6.