OM SYSTEM OM-1 Mark II User Manual

Choosing the information displayed during
playback (qInfo Settings)
Choose the information displayed during playback. Pressing the INFO button during playback will
switch the display between the selected displays.
Menu
MENU U q U 3. Displays U qInfo Settings
Select the display type, and put a check (P) next to it.
Select an option using FG and press the OK button to put a check (P) next to it. To
remove the check, press the OK button again.
Image Only Only the image is shown.
Basic
Minimum information is shown. Press I to hide or show [X] and
[Highlight&Shadow].
Overall
Full information including the shooting conditions and histogram is shown
(P.291).
The set that is currently in use cannot be disabled, but the items to be displayed can be
configured.
331
Choosing the information displayed during
playback (qInfo Settings)
1.
C

OM SYSTEM OM-1 Mark II Specifications

General

Camera Type	Mirrorless
Sensor Resolution	20.4MP
Image Processor	TruePic X
Connectivity	Wi-Fi, Bluetooth, USB-C, HDMI
Body Construction	Magnesium Alloy
Dimensions	134.8 x 91.6 x 72.7 mm
Sensor Size	Four Thirds
ISO Range	ISO 200-102400 (expandable to ISO 80-102400)
Image Stabilization	5-axis in-body
Autofocus System	1053-Point Hybrid Autofocus
Viewfinder Type	Electronic (EVF)
Viewfinder Resolution	5.76 million dots
Viewfinder Magnification	1.65x (35mm equivalent)
Rear Screen	3.0" vari-angle touchscreen
Rear Screen Resolution	1.62 million dots
Video Recording	4K UHD at 60p/50p/30p/25p/24p
Video Format	MOV
Audio Recording	Stereo, external mic input
Storage Media	Dual SD Card Slots (UHS-II)
Battery	BLX-1 Lithium-Ion Battery
Weight	599 g (with battery and memory card)
Battery Life	Approx. 520 shots (CIPA standard)
Shutter Speed	1/8000 to 60 sec
Weather Sealing	Yes (IP53 rated)