If the time until shooting or the shooting interval is 1minute 31seconds or longer, the monitor will
go dark and the camera will enter sleep mode if no operations are performed for 1minute. The
display will turn on automatically 10seconds before shooting for the next interval begins. It can also
be reactivated by pressing the shutter button at any time.
The camera automatically selects [S-AF] for AF mode (P.100) in place of [C-AF] and [C-AF+TR], and
[S-AFJ] in place of [C-AFJ] and [C-AF+TRJ].
When [RAF] is selected as the AF mode (P.100), focus to initiate shooting, then lock focus and start
recording.
Touch operations are disabled during time lapse shooting.
Time-lapse shooting cannot be combined with HDR, bracketing, focus stacking, multiple exposure,
live ND shooting, or live GND shooting.
The flash will not work if the flash charging time is longer than the interval between shots.
When 1000 or a larger number is selected for [Number of Frames], [Time Lapse Movie] will be set
to [Off].
When [High Res Shot] is set to [Onv] (tripod), [Time Lapse Movie] becomes [Off].
If any of the still pictures are not recorded correctly, the time lapse movie will not be generated.
If there is insufficient space on the card, the time lapse movie will not be recorded.
If there is not enough charge left on the battery, the shooting may end partway through. Use
a sufficiently charged battery or connect the supplied USB-AC adapter (P.26) or a mobile battery
conforming to the USB-PD standard to the camera when shooting.
263
Shooting automatically with a fixed interval
(Interval Shooting)
C
C
C
C
C
C
C
C
C
C
C
To Next Page
Loading...
