Press the shutter button halfway to focus.
You can also focus by pressing the AF-ON button (P.116).
When the camera focuses on a subject, a green frame appears on the focus position.
When the camera detects specific elements such as the driver or the cockpit, it focuses on
them.
When [C-AF] or [C-AFJ] is selected as the AF Mode, the camera will continue to track and
focus on the subject with the white frame across the entire screen, even while the subject is
in motion, until the button is released. The tracking area can be changed (P.123).
Press the shutter button the rest of the way down to take the picture.
The camera may fail to detect the subject depending on the subject or art filter selected.
The camera may fail to detect the subject depending on its type or on shooting conditions.
If photographs are taken while the subject is locked (fixed) to focus with BSH1or ProCap
SH1selected in the drive mode (P.190), the lock on the subject may be released.
122
Tracking Focus on Selected Subjects (Subject
Detection)
2.
3.
C
C
C
To Next Page
Loading...
