Remove the hot shoe cover and attach the flash.
Slide the flash in until the foot clicks into place at the back
of the shoe.
Hot shoe cover
1
Position the flash head for bounce-flash photography or direct
lighting.
The flash head can be rotated up and left or right.
Rotate the flash ON/OFF lever to the ON position.
ON/OFF lever
1
Note that flash output may be insufficient for correct exposure when bounce flash lighting is
used.
Rotate the lever to the OFF position when the flash is not in use.
177
Using a flash (Flash photography)
1.
2.
C
3.
To Next Page
Loading...
