Recording
Rate
Choose an audio recording format.
[96kHz/24bit]: High-quality audio.
[48kHz/16bit]: Standard-quality audio.
cPlug-in
Power
In most circumstances, there is no need to change this setting. If your external
microphone does not require plug-in power, and supplying power causes noise to
be recorded, set this to [Off].
[Off]: Does not supply power from the camera to the external microphone.
[On]: Supplies power from the camera to the external microphone.
Camera Rec.
Volume
This setting is only available when an external microphone is connected. When
set to [Inoperative], the camera’s sound recording settings ([Recording Volume],
[cVolume Limiter], [Wind Noise Reduction]) will be disabled.
[Operative]: The camera’s sound recording settings are enabled.
[Inoperative]: The camera’s sound recording settings are disabled. The sound
input from the external microphone is recorded as is.
Sound is not recorded:
with high-speed or slow- or fast-motion movies or when ART 71/ART 72 (diorama) is selected
for picture mode.
Audio can only be played on devices that support the option selected for [Recording Rate].
Operation sounds of the lens and camera may be recorded in a movie.
To prevent it from recording, reduce the operation sounds by setting [nAF Mode] (P.100) to
[S-AF], [MF], or [PreJ], or by minimizing the button operations of the camera.
282
Sound Recording Options (Sound Recording
Settings)
C
-
C
B
To Next Page
Loading...
