OM SYSTEM OM-1 Mark II User Manual

The computer cannot be used to change the camera shooting mode.
The frame rate on the camera display may drop if the view through the camera lens is displayed
simultaneously both on the computer and in the camera monitor.
The camera will upload only photos taken while the camera and computer are connected. Photos
taken while the camera is disconnected from the computer will not be uploaded.
While the camera is connected to a network:
Sleep mode is disabled
Interval-timer photography is not available
[PC connection ended] options will be displayed when the camera’s connection to the network
ends. If you disconnect, any data that has not yet been uploaded will not be uploaded.
If “OM Capture” displays the message [This application is unable to find a camera in the camera
control mode.], check:
that the camera has been paired with the computer, and
that you selected the correct computer when connecting to the network.
450
Uploading Pictures as They Are Taken
C
C
C
B
-
-
B
B
-
-

OM SYSTEM OM-1 Mark II Specifications

General

Camera Type	Mirrorless
Sensor Resolution	20.4MP
Image Processor	TruePic X
Connectivity	Wi-Fi, Bluetooth, USB-C, HDMI
Body Construction	Magnesium Alloy
Dimensions	134.8 x 91.6 x 72.7 mm
Sensor Size	Four Thirds
ISO Range	ISO 200-102400 (expandable to ISO 80-102400)
Image Stabilization	5-axis in-body
Autofocus System	1053-Point Hybrid Autofocus
Viewfinder Type	Electronic (EVF)
Viewfinder Resolution	5.76 million dots
Viewfinder Magnification	1.65x (35mm equivalent)
Rear Screen	3.0" vari-angle touchscreen
Rear Screen Resolution	1.62 million dots
Video Recording	4K UHD at 60p/50p/30p/25p/24p
Video Format	MOV
Audio Recording	Stereo, external mic input
Storage Media	Dual SD Card Slots (UHS-II)
Battery	BLX-1 Lithium-Ion Battery
Weight	599 g (with battery and memory card)
Battery Life	Approx. 520 shots (CIPA standard)
Shutter Speed	1/8000 to 60 sec
Weather Sealing	Yes (IP53 rated)