OM SYSTEM OM-1 Mark II - Page 463

Highlight [0RAW/Control] using the FG buttons and
press the OK button.
USB
MTP
Webcam
0
RAW/Control
USB PD
Exit
OK
Storage
When prompted to choose the connection type, click [USB
Connection].
1
[USB Connection]
1
Launch the copy of “OM Capture” installed on the computer.
Configure OM Capture for download.
Choose a destination for the downloaded pictures.
Take pictures using camera or computer controls.
The pictures will be downloaded to the computer according to the options chosen.
See online help for more information on using the software.
The computer cannot be used to change the camera shooting mode.
The camera display frame rate may drop if the view through the camera lens is displayed
simultaneously both on the computer and in the camera monitor.
The connection to the computer will end if you:
exit “OM Capture”,
insert or remove memory cards, or
turn the camera off.
463
Uploading Pictures as They Are Taken
(0RAW/Control)
3.
4.
5.
6.
C
C
C
-
-
-