EasyManuals Logo

OM SYSTEM OM-1 Mark II User Manual

OM SYSTEM OM-1 Mark II
566 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #563 background imageLoading...
Page #563 background image
Using the wireless LAN/Bluetooth
®
functions
Turn off the camera in hospitals and other locations where medical equipment is present.
The radio waves from the camera may adversely affect medical equipment, causing a malfunction
that results in an accident. Be sure to disable wireless LAN/Bluetooth
®
functions in the vicinity of
medical equipment (P.424).
Turn off the camera when onboard aircraft.
Using wireless devices onboard may hinder safe operation of the aircraft. Be sure to disable wireless
LAN/Bluetooth
®
functions onboard aircraft (P.424).
Do not use this product where it may interfere with nearby radar systems.
Monitor
Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback
mode failure or damage to the monitor.
A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.
When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the
monitor. This is not a malfunction; it will be less noticeable in playback mode.
In places subject to low temperatures, the monitor may take a long time to turn on or its color may
change temporarily.
When using the camera in extremely cold places, it is a good idea to occasionally place it in a warm
place. The monitor exhibiting poor performance due to low temperatures will recover in normal
temperatures.
The monitor of this product is manufactured with high-quality accuracy, however, there may be a
stuck or dead pixel on the monitor. These pixels do not have any influence on the image to be
saved. Because of the characteristics, the unevenness of the color or brightness may also be found
depending on the angle, but this is due to the structure of the monitor. This is not a malfunction.
Legal and Other Notices
Our company makes no representations or warranties regarding any damages, or benefit expected
by using this unit lawfully, or any request from a third person, which are caused by the inappropriate
use of this product.
Our company makes no representations or warranties regarding any damages or any benefit
expected by using this unit lawfully which are caused by erasing picture data.
563
SAFETY PRECAUTIONS

Table of Contents

Other manuals for OM SYSTEM OM-1 Mark II

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the OM SYSTEM OM-1 Mark II and is the answer not in the manual?

OM SYSTEM OM-1 Mark II Specifications

General IconGeneral
Camera TypeMirrorless
Sensor Resolution20.4MP
Image ProcessorTruePic X
ConnectivityWi-Fi, Bluetooth, USB-C, HDMI
Body ConstructionMagnesium Alloy
Dimensions134.8 x 91.6 x 72.7 mm
Sensor SizeFour Thirds
ISO RangeISO 200-102400 (expandable to ISO 80-102400)
Image Stabilization5-axis in-body
Autofocus System1053-Point Hybrid Autofocus
Viewfinder TypeElectronic (EVF)
Viewfinder Resolution5.76 million dots
Viewfinder Magnification1.65x (35mm equivalent)
Rear Screen3.0" vari-angle touchscreen
Rear Screen Resolution1.62 million dots
Video Recording4K UHD at 60p/50p/30p/25p/24p
Video FormatMOV
Audio RecordingStereo, external mic input
Storage MediaDual SD Card Slots (UHS-II)
BatteryBLX-1 Lithium-Ion Battery
Weight599 g (with battery and memory card)
Battery LifeApprox. 520 shots (CIPA standard)
Shutter Speed1/8000 to 60 sec
Weather SealingYes (IP53 rated)

Related product manuals