You can choose the functions performed by the front and rear dials. g“Assigning Roles to the
Front and Rear Dials (KDial Function / nDial Function)” (P.347)
You can use the Fn lever to reverse the roles of the front and rear dials. The Fn lever can also be
assigned other roles. g“Customizing the Fn Lever (Fn Lever Settings)” (P.352)
You can choose whether the display reflects the effects of exposure compensation or maintains
a constant brightness for ease of viewing. g“Changing the look of the display (KLV Mode)”
(P.362)
You can stop aperture down to the selected value and preview depth of field. g“Changing the
roles of buttons (Button Settings)” (P.334)
Subject Too Dark or Too Bright
If the camera is unable to achieve optimal exposure, the shutter-speed display will flash as shown.
Display Problem/solution
Slow shutter speed
Underexposure.
Choose a lower aperture value.
Fast shutter speed
Overexposure.
Choose a higher aperture value.
If the subject is still overexposed at the higher value, the limits of the
camera metering system have been exceeded. Use a third-party ND
(Neutral Density) filter to reduce the amount of light entering the camera.
Shutter speeds as fast as 1/32000s are available in I (silent) mode.
g“Shooting without shutter sound (Silent I Settings)” (P.198),
“Performing the sequential/self-timer shooting” (P.190)
When [KISO] is not set to [Auto], optimal exposure may be achieved by changing the setting.
g“Changing ISO sensitivity (ISO)” (P.166)
62
Choosing aperture (A: Aperture-Priority AE)
B
B
B
B
B
To Next Page
Loading...
