OM SYSTEM OM-1 Mark II - Page 80

Highlight the desired mode using FG buttons and press the OK button.
P
Optimal aperture is set automatically according to the brightness of the subject.
Use the front dial or rear dial to adjust exposure compensation.
A
Depiction of background is changed by setting the aperture.
Use the front dial to adjust exposure compensation and rear dial to adjust aperture.
S
Shutter speed affects how the subject appears. Use the front dial to adjust exposure
compensation and rear dial to adjust shutter speed.
Shutter speed can be set to values between 1/24s and 1/32000s.
M
Freely adjust both aperture and shutter speed.
Use the front dial to select aperture value and the rear dial to select shutter speed.
Choose from shutter speeds of 1/24–32000s. Values of ISO 200–12800 are available
using the [nISO] manual sensitivity control options.
The display shows the difference between the exposure produced by the selected
aperture and shutter speed and the optimal exposure metered by the camera. The
display will flash if the difference exceeds ±3EV.
The option chosen for [bISO-A Upper/Default] (P.169) takes effect.
The low end of the shutter speed changes according to the frame rate of the movie record
mode.
Press the MENU button to exit the menus.
[nMode] can also be set from the super control panel. g“Setting with Super Control Panel/LV
Super Control Panel” (P.91)
80
Recording Movies
5.
B
6.
B