Configuring the Machine Using the Control Panel
222
7
❖ Scanner Carriage
Returns the scanning unit inside the machine to its original position. Before
transporting the machine, use this function to return the scanning unit to its
original position.
•Move To Lock
• [Not Execute]
Exits to the previous level of the menu tree without returning the scan-
ning unit to its original position.
• [Execute]
Returns the scanning unit to its original position.
❖ High Humidity Mode
Sets the machine to produce prints in consistent quality even when humidity
is high.
Default: [Off]
•Off
•Mode1
Select this mode if printouts are blurred.
•Mode2
Select this mode if printouts are curled and/or blurred. Note that if you se-
lect this mode, the first print takes longer than subsequent prints to com-
plete.
•Mode3
Select this mode if printouts are still curled and/or blurred even when
prints are made in [Mode2]. Note that this mode requires more time to pro-
duce the first print than [Mode2].
❖ Color Regist.
Adjusts color registration as necessary. (This adjustment is usually executed
by the machine automatically.)
• [Not Execute]
Exits to the previous level of the menu tree without adjusting color regis-
tration.
• [Execute]
Executes color registration adjustment.
❖ TB Cleaning
Sets the machine to execute periodic cleaning of the interior. You may hear
some noise while cleaning is being executed. This noise does not indicate a
malfunction.
Default: [On]
•On
•Off
To Next Page
Loading...
Need help?
General
