Machine Settings
221
7
❖ Auto Continue
Sets the machine to ignore an error with paper size or type and continue
printing. The printing stops temporarily when an error is detected, and re-
starts automatically after ten seconds.
Default: [Off]
•On
•Off
❖ Toner Saver Mode
Sets the machine to print using a reduced amount of toner.
Default: [Off]
•On
•Off
❖ Supplies Info
Displays information about consumables.
•Toner
Displays the remaining amount of toner.
•Black Life
(New), , , , , (Needs re-
placing)
• Magenta Life
(New), , , , , (Needs re-
placing)
• Yellow Life
(New), , , , , (Needs re-
placing)
•Cyan Life
(New), , , , , (Needs re-
placing)
• Waste Toner Bottle
• Waste Bottle Life
[Ready]
The waste toner bottle is usable.
[Near Full]
The waste toner bottle is almost full, and needs to be replaced soon.
[Full]
The waste toner bottle needs to be replaced.
•Fuser Unit
• Fuser Unit Life
Displays the remaining life of the fusing unit.
(New), , , , , (Needs re-
placing)