Configuring the Machine Using the Control Panel
238
7
❖ System
•Copies
Sets the machine to print the specified number of sets.
This setting is disabled if the number of pages to print is specified by the
printer driver.
Default: 1
• 1 to 999, in increments of 1
•Sub Paper Size
Sets the machine to print onto paper of another size if the specified paper
is not loaded in any tray. Alternative sizes are preset to A4 and Letter.
Default: [Off]
•On
•Off
• Default Paper Size
Specifies the paper size to be used when the paper size is not specified in
the print job.
Default: Letter (8
1
/
2
” × 11”), A4
• A4, B5 JIS, A5, B6-S, A6, Legal, Letter, Half Letter-S, Executive, 8 × 13,
8.5 × 13, Folio, 16K, Com 10, Monarch, C5 Env, C6 Env, DL Env
•Duplex
Sets the machine to print on both sides of paper according to the specified
binding method.
Default: [Off]
•Off
• Long Edge Bind
• Short Edge Bind
• Blank Page Print
Sets the machine to print blank pages.
When cover sheet printing is enabled from the printer driver, cover sheets
are inserted even if you select [No Print].
Default: [Print]
•Print
•No Print
•B&W Page Detect
Sets the machine to print all monochrome pages in monochrome mode
even if color printing is specified.
Default: [Off]
•On
•Off
To Next Page
Loading...
