10
Using the Copier Function
❖ Making 2-sided Copies
• This function is only available when the original is set in the ADF, not when it is set on the
exposure glass.
• Paper must be fed from tray 1 or tray 2, not from the bypass tray. In addition, paper size
must be A4, B5, Letter, Legal, or Executive, and paper type must be thin, plain, recycled,
color, preprinted or prepunched.
You can set the machine to copy in duplex copy mode.
1. Press the [Copy] key.
2. Press any menu key.
3. Press the [ ][ ] keys to select [Duplex Copy], and then press the [OK] key.
4. Press the [ ][ ] keys to select copy orientation from [Top to Top] or [Top to Bottom],
and then press the [OK] key.
5. Press the [ ][ ] keys to select original orientation from [Portrait] or [Landscape], and
then press the [OK] key.
6. Confirm the setting, and then press the [ ] key.
7. Press the [Clear/Stop] key to return to the initial screen.
"Duplex" appears on the display, indicating that the machine is now in duplex copy
mode.
The following types of printout format can be selected depending on your preference.
Printout formats for Top-to-Top copying
[Portrait] [Landscape]
BPC232S
BPC233S
Printout formats for Top-to-Bottom copying
[Portrait] [Landscape]
BPC234S
BPC235S
• After this function is set, all subsequent copies will be 2-sided, unless you cancel the
setting by selecting [Off] for [Duplex Copy].
Advanced Photocopy Settings
To Next Page
Loading...
Need help?
General
