Page Keeper Type M28 (D3DQ-17)
SM 2-69 D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Removing the SPDF front cover
1. Open the SPDF top cover [A].
2. Remove the screw, and then lift up the original tray [B].
3. Open the SPDF and then release the three tabs of the SPDF front cover [A].
4. Close the SPDF slightly and then remove the SPDF front cover [A] while releasing the two
tabs with a thin screwdriver.
Installing the double-feed sensor (emitter)
To Next Page
