SD Card Appli Move
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 2-104 SM
2.21 SD CARD APPLI MOVE
2.21.1 OVERVIEW
There are only two SD card slots (one of them is a service slot).
However, if multiple SD card applications are merged, three or more SD card applications can
be used simultaneously.
The SD card merge function enables the use of three or more functions within the capacity of
two SD cards by physically transferring the function of one SD card to other SD cards (all SD
card options can be stored in two SD cards).
However, because SD card applications are licensed, an SD card license will be transferred to
the target SD card after merging. The original SD card cannot be used even if it is inserted into
the machine.
A process to prevent illegal copying is also performed.
The service program "SD Card Appli Move" (SP5-873) allows you to move application
programs from one SD card to another SD card.
2.21.2 NOTES ON USING THE SD MERGE FUNCTION
• The data necessary for authentication is transferred with the application program from an
SD card to another SD card. Authentication fails if you try to use the SD card after you
moved the application program from one card to another card.
• Do not use an SD card that has been used before for other purposes. Normal operation is
not guaranteed when such an SD card is used.
• An SD card, which becomes empty after the data in it has been moved to another card,
cannot be reused.
• Keep the empty source card (the card which has had its data moved to another card) by,
for example, affixing it near the SD card slot using adhesive tape. This is for the following
reasons:
• The SD card can be the only proof that the user is licensed to use the application
program.
• Yo u may need to check the SD card and its data to solve a problem in the future.
Do not move OCR Unit to another SD card.
To Next Page
Loading...
