Ricoh SAVIN D0AP - Adjustment; User Code Authentication to Restrict Color Printing

Printing Features
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1 6-8 SM
3
@PJL USTATUS PAGE
4
@PJL USTATUS PAGE
5
@PJL USTATUS PAGE
6@PJL USTATUS PAGE
7
@PJL USTATUS PAGE
8
@PJL USTATUS PAGE
9
@PJL USTATUS JOB
END
NAME="Microsoft Word - TEST_page1-3"
PAGES=9
<comment> The page count of all three copies is returned.</comment>
6.1.5 ADJUSTMENT
User Code Authentication to Restrict Color Printing
The Effect of Bit Switch 8-3 on Host Printing with User Code Authentication
This page explains the difference between the default configuration of the device and the effect
of enabling Bit Switch 8-3.
If a GW device is running User Code Authentication to restrict color printing and the host system
does not add the necessary commands to the print job, the default configuration is for a job that
does not include the PJL SET DATAMODE command to be aborted. However, if Bit Switch 8-3
is enabled, a job that does not include the PJL SET DATAMODE command is forced to print in
black and white instead.
Flow charts illustrating the process of the Bit Switch 8-3 settings in more detail are included in
the sections below.
Default Configuration: Bit Switch 8-3 not enabled (Set to 0)
In the following flow chart, the lines and comments in Red represent the processing path of a
host system’s print job in a default case: