Ricoh SAVIN D0AP - Fax Connection Unit Type M34 (D3 Em-03); Overview of Fax Connection Unit

Fax Unit Options
D0C5/D0C6/D0C4/D0AP FAX UNIT 4 SM
Adjusting the handset bell volume
With a thin, pointed object, adjust the bell volume using the volume switch.
• High : H
• Low : L
• No sound : OFF
1.1.2 FAX CONNECTION UNIT TYPE M34 (D3EM-03)
Overview of Fax Connection Unit
This unit allows a machine without the fax unit installed (“Client-side Machine”) to send and
receive faxes via a machine with the fax unit installed (“Remote Machine”).
Requirements:
• Up to six machines can be registered as the Client-side Machines.
• Machines that have the fax unit installed cannot be used as the Client-side Machine.
• Only one machine can be registered as the Remote Machine.
• Firmware for this unit: “aics” (software number: D3A7759)
• Remote Fax transmissions are possible on a G3 line.
• The remote fax function does not support User Code Authentication. Disable the User
Code Authentication on the Remote machine.
• Use this function to check the contents of a file that is stored in memory and not yet sent.
Also, use this function to cancel a transmission from the Client-side Machine.